ZOOZ - Z-Wave+ 700 Double relay module ZEN52

Double relay 230V Zooz ZEN52

This is a 230 V device that allows you to add Z-Wave to 2 different loads. The easiest example is automating 2 light switches in a dual gang box with just one relay. But there are more ways to use your Double Relay.

It’s small enough to fit behind the wall switches even in the crowded and shallow boxes. Keep the color and style of the switch you’re used to, whether it’s a stacked switch or two switches side by side. It accommodates both single pole and 3-way installations.

The relay comes in handy if you need to separate control of your fan motor and fan light that are now controlled by a single switch. Just put the relay in the canopy and wire the loads accordingly.

More Automation

Zooz believe that you deserve the best value in every smart home device. If Zooz can pack two devices into one, they’ll do it. Enjoy double control and extra features to take your home automation beyond the obvious use cases.

Install the relay behind the switches you had to tape over because they’re connected to smart bulbs. Simply disable manual control and start using your old wall switches again without cutting power to the bulbs.

Add a momentary switch to the relay and unlock multi-tap triggers. Double tap to control even more Z-Wave lights or activate your favorite smart lighting presets.

Less Hassle

The Double Relay was designed as a short cut to quick and reliable Z-Wave control. You’re wiring one device instead of two. You’re also pairing one device with your hub instead of two.

Fitting a 3,81 x 3,55 cm relay in a double box is certainly an easier task than trying to put in two full-size smart switches in the same spot. Making connections with the attached pigtail wires is a snap compared to terminal installation that involves cutting and stripping each wire while fixing the screws tightly.

If your hub supports SmartStart, all you need to do is scan the unique QR code on the back of the device to add it to your network with the highest level of security. The relay’s multicolor LED indicator will help guide you through the set-up.

Features of Double relay Zooz ZEN52 :

• Manual or Z-Wave on/off control of 2 individual loads up to 5A
• Installs behind your existing wall switches (single pole or 3-way)
• Small form factor to easily fit in a crowded switch box
• Scene control: trigger actions with multi-tap (select hubs only)
• Smart bulb mode: disable manual and/or Z-Wave control and turn your smart bulbs on or off using wireless signal only
• Remembers and restores on/off status after power failure
• Built-in Z-Wave timer functionality and signal repeater
• Works with LED and incandescent bulbs
• 700 series Z-Wave and SmartStart S2 Security for a safe network

Technical specifications of Double relay Zooz ZEN52 :

• Power: 120-240 VAC, 50/60 Hz
• Maximum Loads: 500W incandescent, 150W LED bulbs, 5A resistive, 1/4 HP fan motors per channel
• Z-Wave Range: Up to 90 meters line of sight
• Dimensions: 3,81 cm tall, 3,55 cm wide, 1,77 cm deep
• Operating Temperature: 0-40° C
• Installation: Indoor use only