THERMOKON - EnOcean temperature probe for pipe (1 m)

The Thermokon wireless sensor is used to measure the temperature of pipes and curved surfaces in connection with SRC-x reception interfaces and higher level control systems.

This measures the temperature of gaseous media in heating, cooling or air conditioning systems (eg fresh air / exhaust air ducts).

Detection of measured values ​​via the higher-level control system.

Transmission to the receiver by means of radio telegrams according to the EnOcean standard.

Integrated temperature sensor and solar energy storage for maintenance free operation.

The standard EEP profile to use is: A5-02-17.

FUNCTIONS :

• Measure the temperature of a pipe or curved surface.
• Program alerts for abnormal temperature readings.

TECHNICAL CHARACTERISTICS :

• Technology: EnOcean, STM
• Transmission frequency: 868.3 MHz
• Transmission range: approx. 30m in the buildings, approx. 300m during free propagation
• Temperature detection: Range: 0 ° C… + 110 ° C
• Resolution: 0.43K
• Absolute precision: typ. +/- 1.1K
• Measured value detection: every 100 seconds
• Send interval:
  • Every 100 seconds with changes> 1.6K
  • Every 1000 seconds with changes Power generator: solar cell, internal gold cap, maintenance free. For type "BAT": 3.6V battery Type LS14250, operating time with battery operation approx. 5 to 10 years (depending on the intentional aging of the components and the self-discharge of the battery used).
• Enclosure:
  • Lower part: material PA6, color white
  • Top cover: PC material, crystal color
  • For the "BAT" type: Top cover: material PA6, color white
• Protection: IP65 according to EN60529
• Sensor cable L: 1m, other lengths on request
• Sensor sleeve: brass
• Ambient temperature:
  • Enclosure (electronics): -25 to + 65 ° C
  • Sensor: -25 to + 110 ° C
  • Max. 93% rH, non-condensing
• Weight: 250g