AJAX - Wireless smoke and heat detector black

Wireless fire detector with temperature sensor that monitors security in the room twenty four hours a day and immediately notifies of smoke and sharp jumps in temperature.

• Authentication to prevent forgery

• Jamming detection and communication channels encryption

• Tampering alarm

Principle of operation

The device detects smoke by means of a camera with photoelectric sensor. If no smoke is emitted, the additional detector registers temperature increase in the room.

Features

It can operate independently from the hub, emitting a fire alarm by means of a built-in siren. Several detectors indicate an alarm simultaneously.

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

TECHNICAL DATAS :

• Classification: Radio channel smoke detector with temperature sensor and integrated siren
• Detector type: Wireless
• Installation method: Indoor
• Compatibility: The device works independently or with Hub, Hub Plus, ReX, ocBridge Plus, uartBridge
• Sensor element: Photoelectric and temperature sensors
• Activation threshold: + 54 ° С to + 65 ° С
• Notification type: Sound / Light
• Integrated siren volume: 85 dB
• Alarm signal reception delay: 0.15 s
• False alarm filter: Yes
• Interconnected alarms: Yes
• Power supply:
  • Battery: Two CR2 batteries
  • Supply voltage: 3 V
  • Battery life - up to 4 years
  • Backup battery: CR2032
• Additional temperature sensor: Available
• Permissible humidity: Up to 80%
• Anti-sabotage:
  • Anti-sabotage protection
  • Jamming detection
  • Inviolable
• Remote adjustment and test: Yes
• Dimensions: 132х132 × 31 mm
• Weight: 220g
• Certification: EN 14604
• Guarantee: Replacement and repair within 24 months from the date of sale. Batteries are not covered by warranty.
• Complete kit:
  • FireProtect detector
  • SmartBracket mounting panel
  • 2 x CR2 batteries (pre-installed)
  • 1 x CR2032 backup battery (pre-installed)
  • Mounting kit
  • Manual