CHERUBINI - META Smart Plug 12A Z-Wave+

The Cherubini Smart Plug is a smart socket that controls any connected equipment and detects overvoltage and / or overcurrent, protecting appliances and equipment from damage caused by excessive electrical voltage. At the same time, it monitors energy consumption, a useful feature not only for those who want to save money, but also for those who care about the environment.

Everything under control

The Smart Plug integrates an extremely precise energy consumption meter, so you can easily monitor the consumption of the connected equipment. It is ready to install, but customizable.

You can control the smart plug from the push button or from a computer, tablet or smartphone, depending on the needs of the moment.

100% reliable

An RGB LED on the device indicates overvoltage or exceeding of power limit. Overvoltage or overcurrent can also be identified by an integrated timer.

In the event of overcurrent, overvoltage or when the push button is pressed, the Smart Plug can control other devices included in the Z-Wave network.

Furthermore, it can act as a signal repeater to increase the reliability of the network.

Visual feedback with RGB LED

An RGB LED provides visual feedback on the devices status and of the operations performed. Like this, you always know if the device has been connected correctly, if it is included in the Z-Wave network and if it is already working.

Saving - Ultra low power consumption

WiDom Devices have the lowest energy consumption amongst similar devices currently available on the market.

Longer duration

The zero crossing feature reduces the electrical stress on the relay contacts and ensures a longer life of the devices.

Multiclick recognition

Control of the local load and the associated devices independently with the recognition of the sequence of clicks. For example, you can control local loads with a single click and associated devices with a double click.

FEATURES : 

• ON/OFF plug
• Multicolored LED providing operational information
• Overvoltage and overcurrent detection
• Overload protection
• Highly accurate energy and power measurement
• Multiiclick recognition
• Visual feedback with RGB LED
• Zero crossing technology
• Supports S2
• Simple installation

TECHNICAL SPECIFICATIONS :

• Power supply: 230 VAC±10% 50/60 Hz
• Maximum load on relay: 2800 VA – 230VAC – 12A
• Temperature Limitation: 105°C
• Work Temperature: -10 +40 °C
• Radio Protocol: Z-Wave 868,4 MHz
• Maximum distance: up to 100 m outdoor/ up to 40 m indoor
• Dimensions: 69x44x44 mm
• Power Consumption: <0,4 Watt
• Electrical IP rating: IP 20
• Actuator Element: Relay
• Conformity: CE, RoHS
• Meter Specifications
  • Parameters: Voltage RMS, Active Power, Energy
  • Meter Range:
    • Voltage RMS: 250 V
    • Active Power: 2500 W
    • Energy: 2.000.000 kWh
  • Resolution:
    • Voltage RMS: 0.1 V
    • Active Power: 0.01 W
    • Energy: 0.001 kWh
  • Maximum Error:
    • Voltage RMS: 2 Volt
    • Active Power: 0.5 Watt