My account






New products

Viewed products

CHERUBINI - META 4 CH PWM Dimmer 7

A510081

Cherubini

New product

The META 4 CH PWM Dimmer 7 controls the light intensity of LED strips or ribbons or 4 independent 12/24 Vdc lighting channels.

More details

More info

  ZWave-SmartStart-SHE.png

The META 4 CH PWM Dimmer 7 is a four-channel PWM dimmer, which thanks to the Z-Wave protocol can control constant voltage LED loads, such as LED strips, halogen lights and constant voltage LEDs. The controlled devices can be powered with 12 or 24 VDC.

It connects between a 12-24 VDC ballast and the constant voltage LED load, and can control up to four lighting channels. The maximum combined output current is 12 A and maximum 6 A for each channel.

The device works on any Z-Wave network, with other Z-Wave / Z-Wave Plus certified devices and controllers from any other manufacturer. Being a constantly powered node, the device will act as a signal repeater for other devices regardless of brand to increase network reliability.

The smallest Z-Wave devices worldwide

The Cherubini plug & play modules perfectly fit into any type of junction box and are easier to install. Series 7 modules have a terminal block with larger contacts to facilitate connections.

Easy to control

They can be managed with buttons or switches, from a computer, tablet or smartphone, depending on your specific needs.

Visual feedback with RGB LED

An RGB LED provides visual feedback on the devices status and of the operations performed. Like this, you always know if the device has been connected correctly, if it is included in the Z-Wave network and if it is already working.

Offline Configuration Mode

Unique feature that allows you to configure some parameters without using a user interface. Allows the installer to set device functionality on site even if the device is not included in a Z-Wave network.

Saving - Ultra low power consumption

Cherubini Devices have the lowest energy consumption amongst similar devices currently available on the market.

Multiclick recognition

Control of the local load and the associated devices independently with the recognition of the sequence of clicks. For example, you can control local loads with a single click and associated devices with a double click.

FEATURES : 

  • 4-channel 12/24 Vdc dimmer
  • Controls light intensity on 4 channels in independent mode
  • Works with a lamp, LED strips or ribbons and halogen lamps
  • Controls the light intensity of all types of dimmable lights, including LEDs and energy saving lamps
  • ON/OFF control option for non-adjustable lights and loads
  • No brightness flickering at very low loads
  • Can be controlled with momentary buttons
  • Optimized memory and computing capacity with the 7 series
  • It can activate a specific scene with one or two clicks by sending a sequence of commands to the controller
  • Control by association of other devices included in the Z-Wave network
  • Power consumption monitoring
  • Offline configuration mode
  • Visual feedback with RGB LED
  • Supports SmartStart and S2
  • Simple installation

TECHNICAL SPECIFICATIONS :

  • Power supply: 12/24 VDC
  • Maximum load: 6 A per channel, 12 A total
  • Temperature limit: 105°C
  • Operating temperature: between 10 and 40°C
  • Radio protocol: Z-Wave 868.4 MHz
  • Maximum distance: up to 100 m outdoors / up to 40 m indoors
  • Dimensions: 37x37x17mm
  • Consumption: <1 Watt
  • Electrical protection index: IP 20
  • Actuator Element: 4 Power Mosfets
  • Compliance: CE, RoHS