SCHNEIDER ELECTRIC - Zigbee Wiser motion and luminosity sensor

This motion and brightness sensor allows you to automatically control associated Wiser functions. This could be lighting (if motion is detected) or even roller shutter management (based on brightness level) and much more...

This detector is for indoor installation only and is not intended for outdoor use. Installation is easy thanks to the Wiser Home application, which guides you step by step.

This detector is part of a complete solution, so you can expand it as you wish. You can add management of new radiators, roller shutter management, lighting management, socket management, or even add sensors to automate your home.

Functions of the Wiser Zigbee Connected Motion Sensor

• Detects motion and measures brightness in a room and transmits this information to the Wiser solution through a Zigbee connection
• Signals low battery level (less than 10%)
• Brightness and/or motion detection thresholds can be configured in the Wiser Home application

Technical Specifications of the Schneider Electric CCT595012 Motion Detector

• Power supply: 2x1.5 V Battery / LR03 AAA
• Battery life: 5 year(s)
• Communication network type: Zigbee wireless, 2.5 mW (2.4 GHz) at < 50 m
• Width: 26.6 mm
• Diameter: 70.8 mm
• Operating conditions:
• - temperature: from -10 to + 50 °C,
• - relative humidity: from 10 to 95 %.
• Detection angle:
• - 360° if mounted on the ceiling at 2.5 m high,
• - from 90° to 110° horizontally and vertically if installed on the wall at 1.2 m high.
• Detection distances:
• - 4 m diameter on the ground if mounted on the ceiling at 2.5 m high,
• - 5 m radius if installed on the wall at 1.2 m high
• Brightness measurement
• - measurement range: from 0 to 2000 lux
• - resolution: 1 lux