My account






New products

Viewed products

ZOOZ - Z-Wave+ 700 0-10V Dimmer ZEN54

ZEN54

Zooz

New product

Full brightness control of your 0-10V LED drivers, including panels and bulbs.

More details

More info

   

Set the right brightness with 0-10V dimmer from Zooz

Control your 0-10 V LED fixtures fully with this compact dimmer module. Set a schedule for the lights to dim down automatically every night. Create custom rules based on occupancy or daylight.

Light automation ensures that the light level at your restaurant, warehouse, or office is always right. You no longer need to remember to flick the wall switch. The lights will dim themselves when needed and they’ll shut off for the night. Simply program the 0-10 V Dimmer in your Z-Wave hub and enjoy the freedom that comes with smart lighting in any space.

Remember that you’ll need a compatible Z-Wave controller to use this device.

Installation

The 0-10 V Dimmer installs between your 0-10 V LED driver and a wall switch. It needs a 120 V power line and neutral so please make sure your wiring meets the requirements for a successful set-up.

The dimmer allows you to change the brightness level of the driver via Z-Wave as well as from the wall switch if you connect it to a momentary push-button switch (do NOT connect it to any existing wall dimmers).

You can also cut power to the LED driver completely in case it’s a 1-10 V driver that doesn’t turn the light off completely when dimmed down. This is thanks to a built-in relay in this smart module. Advanced settings also allow you to set minimum and maximum brightness levels as well as the ramp rate speed.

Features of 0-10V dimmer Zooz ZEN54 :

  • Z-Wave 0-10 V dimming control for LED fixtures
  • Great for 0-10 V LED drivers in LED panels
  • Smooth dimming with instant status updates
  • Installs behind your existing wall switch (on/off or momentary)
  • 700 series Z-Wave chip for better range and faster control
  • Advanced configuration including min and max brightness
  • Built-in Z-Wave signal repeater for boosted comm

Technical specifications of 0-10V dimmer Zooz ZEN54 :

  • Installation: Indoor use only
  • Power: 120-240 VAC, 50/60 Hz
  • Maximum Loads: 4 A, 960 W at 240V
  • Z-Wave Range: Up to 90 meters line of sight
  • Dimensions: 3,81 cm tall, 3,55 cm wide, 1,77 cm deep
  • Operating Temperature: 0-40° C