ZOOZ - Z-Wave+ 700 DC motors controller ZEN53

DC motors controller Zooz ZEN53

Get as much natural light every day with motorized blinds and shades. Schedule and automate your window treatments for full privacy and peace of mind.

Create custom scenarios including air quality and temperature sensors to work for your routine. Set the rules and forget about running up and down to adjust the blinds from the switch or manually from the string. Simply enjoy the best light every moment without thinking about it.

The DC Motor Controller attaches to your existing motor and wall switch. That means your blinds, shades, or awnings need to be motorized already before you can add this smart module to them. Make sure you follow the electrical specs when installing the device.

Installation

As long as your motor runs on 6-32 V DC and operates based on reverse polarity, you can use this Z-Wave controller to automate it.

Make your blinds, shades, awnings, or screens smarter with this handy module that installs between the motor and your wall switch. Wire it to a 2-button momentary wall switch or two separate momentary switches for convenient up / down / stop control. The module will auto-calibrate but it also gives you the option to override and fine tune any calibration if needed.

Use it in shutter up/down mode or in Venetian mode to turn the blinds for open/close. Remember that your Z-Wave hub needs to support this device so you can program it. Check compatibility before purchasing the DC Motor Controller.

Features of DC motors controller Zooz ZEN53 :

• Manual or Z-Wave control of DC motors (reversed polarity)
• Great for motorized shades, blinds, awnings, screens, and more
• Shutter and Venetian blind modes to choose from
• Installs behind your existing wall switch (momentary button)
• 700 series Z-Wave chip for better range and faster control
• Advanced configuration including timer settings and calibration
• Built-in Z-Wave signal repeater for boosted communication
• SmartStart and S2 Security for a safer network

Technical specifications of DC motors controller Zooz ZEN53 :

• Power: 6-32 VDC
• Maximum Loads: 1.5 A (use with DC motors only)
• Z-Wave Range: Up to 90 meters line of sight
• Dimensions: 3,81 cm tall, 3,55 cm wide, 1,77 cm deep
• Operating Temperature: 0-40° C
• Installation: Indoor use only