ZOOZ - Z-Wave+ 700 Dry contact relay ZEN51

Dry contact relay Zooz ZEN51

This is a 230 V 10 A on/off relay you can use in your lighting applications or to control any load within the device’s specs via Z-Wave. You can also add a mechanical on/off switch to it for parallel manual control.

The relay is perfect if you like your old toggle switches and don’t want to replace them with smart decora style wall switches. You can simply install the relay behind your existing on/off switch to make it smart. Just make sure it’s not a dimmer or an illuminated switch – only simple mechanical and momentary switches can be used with this device.

No neutral in the switch box? You can put this relay at the fixture where you’ll always find the neutral connection and still keep your wall switch in the set-up. Your hub will get an instant report if the light is turned on from the switch.

Flexible Installation

The relay works well in many different scenarios. It can switch a 230 V light or a dry contact load. It can monitor and report on/off status of your sump pump to the hub. And there’s more ways you can customize it.

Install the relay in a single pole or 3-way set-up. If you don’t have neutral in the switch box, just move it to the fixture, it will fit right in there. We provide wiring diagrams and step-by-step instructions for both simple and complex applications.

The device is as small as it can get so you don’t have to worry about crowded boxes. Pigtail wires make it easier and faster to install compared to terminal screws. And when it’s time to add the relay to your hub, SmartStart ensures quick and secure pairing.

Smarter Control

Change how the relay behaves to meet your smart home needs. You’d be surprised to see the number of options this device offers for anything from the type of wired wall switch to the default recovery status after a power failure.

One of the most useful features of this device is the smart bulb mode. Disable the relay so that you never cut power to your smart bulb when toggling the wall switch. But at the same time, receive an on/off event when the switch is activated and trigger your smart lights with it through Z-Wave. It turns out, you don’t need to change your habits around a truly smart home.

If you replace a simple on/off switch with a momentary type, you’ll unlock the famous scene control capability. It allows you to program multi-tap triggers from the switch, much like buttons on a remote control. You can now double tap for all of your smart bulbs to turn blue or activate your favorite preset with a click.

Features of Dry contact relay ZEN51

• Manual or Z-Wave on/off control with instant status updates
• Great for 230 V input monitoring and dry contact relay control
• Installs behind your existing wall switch (single pole or 3-way)
• Scene control: trigger actions with multi-tap (select hubs only)
• Remembers and restores on/off status after power failure
• Built-in Z-Wave timer functionality and signal repeater
• Works with LED and incandescent bulbs
• 700 series Z-Wave and S2 SmartStart Security for a safe network

Technical specifications of Dry contact relay ZEN51

• Power: 120-240 VAC, 50/60 Hz
• Maximum Loads: 960W incandescent, 150W LED bulbs, 10A resistive, 1/2 HP fan motors
• Z-Wave Range: Up to 90 meters line of sight
• Dimensions: 3,81 cm tall, 3,55 cm wide, 1,77 cm deep
• Operating Temperature: 0-40° C
• Installation: Indoor use only