SHELLY - Z-Wave Scene activation module Shelly Wave i4 DC (24 VDC)

Replace one of the switches in your room and control any other installed Z-Wave device!​

Wave i4 DC allows you to manually activate or deactivate any created scene, run synchronized actions, or execute complex trigger scenarios. You can use it to control other Z-Wave devices within your network with one push of a button. Due to its retrofit design, it is small enough to fit behind every wall switch. Wave i4 DC can show the status and control the action of four inputs, offering maximum convenience by enabling manual control of your smart home to all family members.​

Shelly Qubino works on Z-Wave

By using Z-Wave, smart home products can seamlessly communicate with each other, regardless of their brand or platform, thanks to a centralized smart hub! Shelly Qubino devices work on the latest Z-Wave chip generation (S800), one of the most popular standardized technologies for smart homes in the world. ​

Works with any Z-Wave gateway

Wave i4 DC is retrofit and designed to fit behind switches/push-buttons. Once installed, include the device in your Z-Wave network (Z-Wave gateway is required) and control it using your smartphone or tablet. Shelly Qubino devices work with over 4000 Z-Wave certified devices and gateways. 

Multi-click support​

Up to 12 possible actions. Control the lights, close the blinds, turn off outlets. Manually control any Z-Wave device within your network and run the scenes you desire.

Wide range of voltage support

Wave i4 DC can be powered by 5-24 V DC.​

Associations ​

Establish direct communication between devices in your Z-Wave local network and set actions with no hub present! Configure up to 8 associations on the switch buttons and trigger them manually. 

Smart scenes

Set custom scenes by combining Wave i4 with any other Z-Wave devices (gateway required). 

FEATURES of Shelly Qubino Wave i4 DC

• Wave i4 DC is an input reader device (it does not contain relays).​
• Manually control other Z-Wave devices (e.g. with a multi-button switch)​
• Multi-click – activation of up to 12 actions​
• Extremely low power consumption: < 0.2 W​
• Z-Wave frequency band: 868.4 MHz (CEPT countries)​
• Latest technology: Z-Wave 800 Series​
• Automatic set-up with SmartStart ​
• Security 2 Authenticated for the highest level of security​
• Over-the-air firmware updates​
• Works with Z-Wave-certified gateways and over 4,000 Z-Wave devices​

TECHNICAL SPECIFICATIONS of Shelly Qubino Wave i4 DC

• Power supply: 5-24 V DC 
• Power consumption: < 0.2 W
• Number of inputs: 4
• Distance: Up to 40 m indoors (depends on local condition)
• Z-Wave™ repeater: Yes
• CPU: Z-Wave™ S800
• Z-Wave™ frequency bands: 868,4 MHz
• Maximum radio frequency power transmitted in frequency band(s): < 25 mW
• Size (H x W x D): 37x42x16 ±0.5 mm
• Weight: 17 g
• Mounting: Wall console
• Screw terminals max. torque: 0.4 Nm
• Conductor cross section: 0.5 to 1.5 mm²
• Conductor stripped length: 5 to 6 mm
• Shell material: Plastic
• Color: Yellow
• Ambient temperature: -20°C to 40°C
• Humidity: 30% to 70% RH