Zigbee Tuya Water Quality Monitor - YAGO

With the Zigbee Tuya YAGO water quality monitor, you monitor the water quality in real time of your swimming pool with different measurements: Chlorine (pH), TDS (ppm), EC (conductivity) , CL (chlorine), ORP, SALT and pool water temperature with more precision, speed and stability.

This sensor must be associated with a compatible Zigbee home automation hub (Tuya, Jeedom or Home Assistant) to be used.

Warning:

• The water in the swimming pool should be between 6.5-8ph and ORP between 487-840mv, and the chlorine value will be displayed normally. Chlorine will not be displayed if any of the values are out of range.
• If the PH value is lower than 6.5, it means that the water quality is too acidic and contains impurities, and it is necessary to add disinfectant water for disinfection.
• If the ORP value is higher than 850mv, it means that the disinfectant has been added too much, and it is necessary to add water or change the water for neutralization.
• If the ORP value is lower than 487mv, it means that too little disinfectant has been added and the pool needs to be disinfected again.

FUNCTIONS:

• PH and Salt Tester for Saltwater Pool: The professional water quality tester makes it much easier for you to confirm the pH and salinity level (ppm) in the current swimming pool when you start using the salt electrolyzer generator; also work for weekly salt check, to ensure chlorinator working properly, balance salt, chlorine and pH. Good helper for salt water swimming pool.
• Free chlorine and pH tester: recommends a pH of 7.2 to 7.8 pH and a free chlorine concentration of 1 to 3mg/L in swimming pools; The pH and chlorine monitor can test both free chlorine and pH, knowing that both levels are within the optimal range for clear swimming pool.
• Zigbee wireless app control: wireless connection. After the pH and salinity tester is connected to your smartphone, open the Tuya app, you can view the pool data in real time anytime, anywhere (the app is free). The highest or lowest measurement value can be set according to demand in the smart scene, the detection result is out of range can be requested on the APP, allowing you to disinfect the pool at the best time .The device must be used with a gateway
• 7 in 1 Multifunctional Swimming Pool Monitor: Monitor pH, ORP, Salinity, Chlorine, EC, TDS, Temperature value. Range: pH(0.0-14.0pH), salinity(0-9990ppm), ORP(-999~+999mV), CL(0.0-4.0mg/L), EC(0-9990μS/cm, 10.01-19.99 mS/cm , TDS(0-9990ppm), Temperature(32.0-122.0℉);Professional pH ORP CL Salt Tester for Swimming Pool, Above Ground Pool, Inground Pool, Inflatable Pool, Salt Water Pool, Chlorinated Pool, Spa, Hot Tub .
• Other design you need: support solar charging and USB charging (very convenient for outdoor swimming pool); floating design, floating in the water; support 2.4GHz WiFi connection; easy to calibrate in the app.

TECHNICAL FEATURES:

• PH range: 0.0-14.0
  • Resolution: 0.1ph
  • Accuracy: ±0.1ph
• CL range: 0.0-4.0mg/L
  • Resolution: 0.1mg/L
  • Accuracy: ± 0.1mg/L
• Salt range: 0-999ppm, 1000-9990ppm
  • Resolution: 1ppm, 10ppm
  • Accuracy: ± 2% F.S.
• EC range: 0-2000us/cm, 2000-9990uS/cm,10.01-19.9 mS/cm
  • Resolution: 1uS/cm 10uS/cm 0.01 mS/CM
  • Accuracy: ± 2% F.S.
• TDS Range: 0-999ppm,1000-9990pp
  • Resolution: 1ppm 10ppm
  • Accuracy: ± 2% F.S.
• ORP range: ±999mv
  • Resolution: 1mv
  • Accuracy: 15mv
• Temperature range: 0.0℃-50.0℃ 32.0℉-122.0℉
  • Resolution: 0.1℃/0.1℉
  • Accuracy: ±0.5℃
• Battery: USB (Cable NOT INCLUDED) and solar powered
• Size: 21*16.5cm
• Compatibility: Tuya and Zigbee2Mqtt
• Calibration: PH: 4.00/7.00/10.01, ORP:222mv (including calibration liquid)
• All functions have been calibrated when sending the product, please use it directly.

• Yago, l'analyseur d'eau connecté pour piscine Zigbee 7 en 1
• Intégration de la sonde de piscine connectée Yago dans la box domotique eedomus via le cloud Tuya