ZOOZ - Z-Wave Plus 700 Series XS Tilt/Shock Sensor ZSE43

ZSE43 sensor can monitor door, window, garage door or gate. Get reliable open/close reports for garage doors and gates. Monitor window or door glass from your Z-Wave hub to boost security.

Safer Entry Points

Doors, windows, and garage gates are the most vulnerable entry points to your home. This sensor was designed to offer additional protection to all of them with fast wireless status reports.

Choose to use it as just a tilt sensor or a simple vibration detector and if needed, get both types of reports for the doors and windows you want to monitor. The tilt sensor can be programmed to send a notification if your garage is open. With the shock sensor functionality, you’ll be able to tell if the glass on your basement window has been broken or tampered with.

As always, a Z-Wave hub is required to use our smart security products. Please check the compatibility list below before purchasing the sensor to make sure your system supports it.

Modern Security

Enjoy hardware and software enhancements from the latest tech with this extra small unassuming smart sensor.

It’s just under 5 cm tall and only 0.8 cm thick, making it over 50% smaller than the other popular Z-Wave tilt sensors out there. Despite its size, the device has up to 50% more range and sends quicker reports thanks to the 700 series Z-Wave chip. 

It runs on a single CR2032 coin battery that’s easy and cheap to get once it’s time to replace it. And with a dedicated weatherproof case (sold separately), you can safely use this sensor outdoors without any extra protection.

DIY Smart Garage Opener

Use this sensor with our MultiRelay and create a fully automated garage door system. The sensor will keep you in the know by reporting open / close status of the gate while the relay allows you to control the opener remotely.

Connect up to 3 openers to the MultiRelay and activate them individually – that’s 3 gates made smarter with a single device. Put the Tilt/Shock sensor on each door to complete the set-up.

FEATURES :

• Quick and reliable tilt and vibration alerts to your hub
• New 700 series chip for faster communication and more battery life than ever
• Extra small for discreet mounting
• Protective rubber coating
• Powered by a long-lasting single coin battery
• The latest S2 security and SmartStart for secure set-up
• Supports OTA firmware updates

TECHNICAL DATAS :

• Power supply: 1 CR2032A battery (included in the box)
• Z-Wave Signal Frequency: 868.42 MHz
• Range: Up to 100m line of sight
• Installation and Use: Indoor or outdoor with waterproof case (sold separately)
• Operating Temperature: 0-40° C
• Dimensions: 4,8 x 0,8 x 2,5 cm

• Découverte du capteur de choc et d'inclinaison Z-Wave+ série 700 de Zooz ZSE43
• Zooz, des périphériques Z-Wave 700 à petit prix !