TRIO2SYS - DIN rail receiver 1 channel EnOcean 16A

DIN rail receiver 1 channel EnOcean 16A

The DIN rail 1-channel 16A receiver is used to receive radio signals from switch transmitters or EnOcean sensors.

Designed for switching heavy loads, it can switch resistive loads, incandescent lamps, halogen, fluorescent tubes, ELV halogen lamps with ferromagnetic and electronic transformer, power contactor or small motor.

The 1-channel 16A modular receiver is equipped with the “repeater” function as well as the Remote Commissioning function (allowing remote configuration of the receiver).

FEATURES :

• 1 channel 16A receiver module
• EnOcean technology
• Control lights / devices remotely
• ON / OFF function
• Support any type of load
• Up to 32 transmitters can be assigned (switches, presence detectors, or magnetic window or door contacts)
• Zero Crossing Technology
• Repeater and status feedback functions
• Remote commissioning
• DIN rail mounting
• Easy to install and use

TECHNICAL SPECIFICATIONS :

• Power supply: 230V ~ / 50 Hz
• Power consumption: 3W
• Output load:
  • Resistive load: 16A / 3500VA max (Cos φ = 1)
  • Inductive: 800W with cosφ = 0.4 to 0.6
  • Halogen / Incandescent: 2300W
  • Fluorescent: 1000W
• EnOcean Equipment Profile: D2-01-01
• Dimensions: 17.5mm x 97.4mm x 66.4mm (1 DIN rail slot)
• Operating temperature: -10 to + 45 ° C
• Humidity: 0% to 75% relative humidity (non-condensing)
• Transmission frequency: 868.3MHz
• Range in buildings:
  • Masonry: 20m, through 3 walls maximum
  • Reinforced concrete: 10m, through 1 wall / ceiling maximum
  • Plasterboard / Wood: 30m, through 5 walls maximum