ECODIM - Smart LED rotary dimmer Z-Wave 200W ECO-DIM.07 Basic

The Z-Wave LED dimmer with push / rotary knob! The LED dimmer works with a normal 2-wire connection and can be operated with the usual flick of the wrist and via home automation.

So have you paired a hub / controller such as FIBARO, HOMEY etc. with Google Home / Assistant or Amazon Alexa? Then you can control this LED dimmer by voice, via the app and with a flick of the wrist.

In addition, this digital smart LED dimmer has a consumption meter, wide range (0-200W LED), excellent dimmability and light stability (MIN adjustment) and all A-brands cover material fit on the built-in element.

Suitable for> 90% of all (normal) dimmable LED lamps. Of course you can also use it if you don't have an app or home automation system at home yet. The dimmer comes with a clear manual. In short, a very complete and unique product and a world first!

With this smart Z-Wave LED dimmer you can make your 'dumb' lamps smart. You do not need to connect smart LED lamps to this LED dimmer, but simply normal / dumb LED lamps (working on phase cut / trailing edge).

Difference with the Pro version :

- The basic version only has a minimum light level potentiometer
- The basic version has no clambs for fixation (but in general also not needed!)
- The basic version therefor is only 26mm deep and very easy to install
- The basic version comes without a coverplate, but is compatible with the most common brands.

FEATURES :

• Z-Wave rotary dimmer
• Push / Turn
• Suitable for all Z-Wave home automation
• Consumption meter
• 0-200W LED
• Suitable for most common brands cover plates: Berker by Hager, Busch-Jaeger, Gira, JUNG, Kopp, Merten by Schneider 51xx and System M, Niko, PEHA
• Optimal dimmability & light stability
• MIN adjustment
• Protection against overload & interference signals
• Suitable for 90% of all dimmable LED lamps
• Installation with existing 2 wires (no neutral wire or bypass required)
• Suitable for wireless changeover / hotel switching with wireless switch
• Silent dimming
• Soft-start system
• Suitable for surface-mounted boxes & flush-mounted boxes with or without screw holes
• Cover frame and dimmer button not supplied

TECHNICAL SPECIFICATIONS :

• Protocol: Z-Wave
• Voltage: 230V 50/60Hz
• Power (load):
  • LED: 0-200W
  • Halogen light bulbs: 10-300W
• Dimmer type: RC Phase cut
• Operation: Push and turn button
• Dimensions:
  • Inside: 70,6 x 70,6 x 26mm
  • Outside (including cover plate): 84x84mm
• Weight: 49,98g