SMARTHOME EUROPE - LoRa Pulse Counter IP65 with 4 inputs

The SHE-SI-11 pulse counter is designed to count incoming pulses on 4 independent inputs, accumulating and transmitting this information via the LoRaWAN ® protocol to the gateway via wireless communication.

In addition, this can be used as a safety device because one of the four inputs can be configured as a safety input.

The pulse meter can be used for all utility meters and industrial equipment with pulse output, including water, electricity and gas meters.

The meter is powered by a 3600 mAh SAFT battery.

FUNCTIONS :

• Measure the consumption of water, electricity or gas
• Can handle any industrial equipment with pulse output
• Outdoor use
• Class A
• Frequency: EU868
• Save undelivered packets in memory (up to 200 entries)
• Temperature measurement
• Hourly referencing of readings by internal clock
• Communication period - every 5, 15, 30 minutes, 1, 6, 12 or 24 hours
• Data collection period - every 5, 15, 30 minutes, 1, 6, 12 or 24 hours
• ADR (Adaptive Data Rate) support
• Sending confirmed packets (configurable)
• OTAA or ABP activation (configurable)
• Two operating modes "Active" and "Storage"
• Additional communication when the safety inputs are activated
• Integrated battery charge measurement
• Sensitivity: down to -138dBm

TECHNICAL CHARACTERISTICS :

• Pulse inputs: up to 4
• Maximum input signal frequency: 200 Hz
• Security inputs: up to 4
• USB port: mini-USB, type B
• Operating temperatures in ° С: -40 to +85
• Integrated temperature sensor: Yes
• LoRaWAN ® class: A
• Number of LoRaWAN ® channels: 16
• Frequency: EU868
• Activation type: ABP or OTAA
• Communication period: 5, 15, 30 minutes, 1, 6, 12 or 24 hours
• Data collection period: 5, 15, 30 minutes, 1, 6, 12 or 24 hours
• Antenna type: internal
• Sensitivity: -138 dBm
• Line of sight radio coverage: up to 15 km
• Radio coverage in restricted urban conditions: up to 5 km
• Default transmitter power: 25mW (configurable)
• Maximum transmitter power: 100mW
• Battery type: 3600 mAh (SAFT)
• Case dimensions in mm: 95 х 50 х 45
• Ingress protection rating: IP65
• Mounting: clamping to the support, DIN rail, wall mounting