HEATIT - Battery operated thermostat Z-Wave Z-TEMP3 white

Heatit Z-Temp3 is a battery-operated thermostat designed for controlling waterbased heating systems. Used in combination with the Heatit Z-Water2, you can control your heating system through the Z-Wave® network or via the buttons on the front panel. The thermostat has a user-friendly interface.

Heatit Z-Temp3 has 3 modes: Heat, Cool, and Eco.

The thermostat fits into System 55 frames, and may be mounted alongside other equipment such as e.g dimmers or light switches. Heatit Z-Temp3 can also be mounted directly on the wall or placed freely, e.g. on a shelf.

Heatit Z-Temp3 can be set as a master thermostat. This means that you can set the setpoint and mode on one unit, and it will automatically send the setpoint and mode to other connected units.

All communication between Heatit Z-Temp3 and the controlled device is 100% wireless.

Heatit Z-Temp3 uses 2x AAA batteries, but you can also connect the device to an external power source. The Heatit Transformer 230VAC (45 126 48) is recommended for this purpose.

Heatit Z-Temp3 can be associated with Heatit ZM Single Relay, other Z-Wave relays, Heatit ZM Thermostat, Heatit Z-TRM6 Thermostat and other Z-Wave devices to control other types of heating solutions.

Heatit Z-Temp3 is a great choice for the restoration or renovation of existing buildings, as it is easy to install without the need for wiring. We recommend using multiple 230VAC devices to create a mesh network.

Features of Heatit Z-Temp3 thermostat Z-Wave :

• Z-Wave 800 series
• Battery-operated thermostat for controlling relays and thermostats
• Internal temperature sensor
• Humidity sensor
• Master thermostat
• Hysteresis - PWM
• 3 modes: Heat - Cool - Eco
• Open Window Detection
• 10 associations per group
• LCD display with backlight
• Lock mode/child lock
• Firmware update (OTA)
• SmartStart
• Supports encryption modes S0, S2 Authenticated Class, S2 Unauthenticated Class

Technical specifications of Heatit Z-Temp3 :

• IOT Protocol: Z-Wave - 868.4 MHz (EU)
• Voltage: 3.3 VDC
• Hysteresis: 0,3 to 3,0 (default hysteresis 0,5)
• Protection grade (IP): IP21
• Ambient humidity (RH non-condensing %): 10-85
• Ambient temperature range in storage (°C):- 30-70
• Declarations: RoHS, Reach, RED
• International standard: CE, Z-Wave Plus
• Signal range radio frequency (max no. meters): 40
• SDK: 7.18.3
• IOT Chip type: Z-Wave 800 chip
• Push buttons: 3
• Z-Wave encryption mode: S0, S2 Authenticated Class, S2 Unauthenticated Class