HEATIT CONTROLS - Wi-Fi floor heating electronic thermostat

Heatit WiFi is an electronic thermostat for electrical underfloor heating, designed to be mounted in a standard flush box. The thermostat has a simple user interface and can be easily programmed via the capacitive buttons. The color screen displays an accessible user interface.

The thermostat has a built-in WiFi chip that allows you to control it from a user-friendly app. The ”Heatit WiFi” app is available on Google Play and in the App Store. Works with Amazon Alexa and Google Home (pending). If you are installing multiple thermostats in the same house, you may copy the settings from one thermostat to the next. This simplifies installation.

Heatit WiFi Thermostat is equipped with a single-pole switch and fits into System 55 frames. The thermostat can withstand a load of max 16A/3600W at 230VAC. We recommend a contactor for loads above 13A. The thermostat may be connected to an wired external sensor.

The thermostat is designed for electrical heating. Approved for use in bathrooms.

FEATURES :

• No need for gateway
• Works as a stand-alone unit
• Can be controlled from anywhere (with internet connection)
• Floor sensor or external room sensor
• Internal temperature sensor
• Power regulator
• Adaptive regulation
• Energy calculator
• Weekly program
• Home/Away/Anti-frost
• Controls via app
• Lock mode/Child lock
• Single pole switch
• Temperature limiter with use of floor sensor
• Gradual heating (for new concrete floors)

TECHNICAL SPECIFICATIONS :

• Protocol: WiFi 2.4GHz 802.11bgn
• Display: 1.8” TFT, 128x160 resolution
• Rated voltage: 230VAC 50Hz
• Max load:
  • 3600W (only resistive loads)
  • Recommends contactor for loads higher than 13A
• Max current: 16A
• Power consumption: <2W
• Ambient temperature: 2°C to 30°C
• Temperature range: 5°C to 40°C
• Hysteresis: 0.2°C to 2°C (0.5°C standard)
• Compatible with NTC sensors with values: 6.8, 10, 12, 15, 22, 33, 47, 100 kΩ @ 25°C
• IP Code: IP 21