SMLIGHT - Dongle USB Ethernet POE Zigbee 3.0 EFR32MG26

SMLIGHT - USB Ethernet POE Zigbee 3.0 Dongle EFR32MG26 - SLZB-06MG26

The SMLIGHT SLZB-06MG26 dongle is an ultra-complete, compact home automation gateway compatible with Zigbee 3.0, Thread (Matter-over-Thread), WiFi and USB. Thanks to the EFR32MG26 chip and a dual radio system, this controller can operate as a Zigbee coordinator or router, with simple mode switching via web interface or button. Powered by USB-C or PoE, it comes pre-flashed with SLZB-OS, features an OTA update interface, optimized design, high radio power and unrivalled multi-protocol compatibility.

Functions of the connected Zigbee dongle Ethernet/USB :

• Zigbee 3.0 gateway to LAN, WiFi or USB (switchable mode)
• Support for Zigbee 3.0, Thread (Matter-over-Thread) and WiFi protocols
• Operation as Zigbee coordinator or router
• Simple mode change via web interface or physical button
• Remote OTA update of Zigbee and ESP32 firmware
• SLZB-OS interface with secure access, VPN, scripts, dashboard, OTA, etc.
• Total control of parameters: LED off, interface change, zHub
• Compatibility: Zigbee2MQTT
• ZHA
• • (Home Assistant)
  • Open Thread Border Router (Matter)
  • Domoticz, Jeedom, etc. via USB port or network

Technical specifications - SLZB-06MG26 SMLIGHT :

• Zigbee chip: Silicon Labs EFR32MG26 (+20 dBm)
• Main processor:
• ESP32
• Connectivity:
  • USB-C (power and data)
  • Ethernet RJ45 (LAN8720)
• Power supply:
  • USB-C 5V DC
  • Poe 48V (standard 802.3af)
• Consumption: up to 1.5 W (dual active radio)
• Antennas:
  • 2x external SMA connectors with 2.4GHz antennas included
  • Internal PCB antenna for WiFi/Bluetooth
• Housing: compact, ventilated ABS, wall or DIN rail mounting
• Accessories included: screws, screwdriver, ruler, double-sided tape
• LEDs: 4 LEDs (2 for main SoC, 2 for Zigbee)
• Multifunction button: reset, mode change, etc.
• Firmware compatibility: SLZB-OS 2.9.4+, Ember/EZSP
• Open-source firmware available (basic version)
• DIY: access pins for EFR32MG26 and ESP32
• Dimensions: compact, discreet design
• On-board chipsets:
  • Zigbee chip 3.0 chip: EFR32MG26 (Silicon Labs)
  • Main control chip: ESP32 (Espressif)
  • USB/UART converter: CP2102
  • Ethernet SoC :
• • LAN8720
• Supported connectivity:
  • Ethernet: Yes
  • WiFi: Yes
  • USB Type-C: Yes (power and control)
  • PoE: Yes
• Zigbee modes supported:
  • Zigbee 3.0: Yes
  • Zigbee 3.0 router mode: Yes
  Zigbee
• • to Ethernet: Yes
  Zigbee
• • to USB: Yes
• Software compatibilities: Zigbee2MQTT
• • : Yes
  ZHA
• • (Home Assistant) :
• • Yes
• Firmware features:
  • Preflash: Yes (Zigbee + ESP)
  • Flash ESP32 integrated via CP2102: Yes
  • Autoboot ESP32 via DTR / RTS: Yes
• Design and dimensions:
  • Compact size: Yes
  • Dimensions :
• • 160 × 22 × 24 mm
• Radio performance:
  • Zigbee SoC output gain: +20 dB
  • Additional antenna gain: +5 dB
• Operating environment:
  • Operating temperature: +5°C to +35°C