AC controller Aidoo Z-Wave Plus Mitsubishi Electric - AIRZONE

Device for remote management and integration of units. Wireless network access via Z-Wave Plus.

The Airzone Aidoo Z-Wave Plus works in any Z-Wave network with other Z-Wave/Z-Wave Plus certified devices and controllers from any other manufacturer. As a permanently powered node, it will act as a repeater regardless of vendor to increase network reliability.

FEATURES:

• Two-way communication with the air conditioning unit
• Compatible with all Z‑Wave and Z‑Wave Plus certified controllers
• Combination Standard & Smart Start
• Uses standard Thermostat-like command classes defined by the Z‑Wave protocol
• Control of the different parameters of the unit
• Error detection during communication
• Time programs for temperature and operating mode
• Has a port for Modbus integrations
• Powered by air conditioning unit

TECHNICAL SPECIFICATIONS :

• Connection to indoor unit
• V max 18 VDC
• I max 137.5 mA
• V in 12 - 16 VDC
• Consumption: 310mW
• Cable type: Mitsubishi connector
• Cable length: 2.5m
• Z-Wave Communications
• Protocol: Z-Wave Plus
• Model: ZGM130S
• Communication frequency: 868.4 MHz
• Maximum power - Antenna power: 13 dBm
• Sensitivity: -97dBm
• Protection system: S2 Security
• Maximum distance: Up to 100m outdoors, 40m indoors
• Modbus port
• Twisted and shielded cable 2 x 0.22 mm2 + 2 x 0.5 mm2 (AWG 23 – 2 wires + AWG 20 – 2 wires)
• Communication protocol: MODBUS RS-485, Pair – 19200 bps
• Operating temperatures
• Storage: between - 20 and 70 ºC
• Operating: between 0 and 45 ºC
• Operating humidity range: 5-90% (non-condensing)
• Mechanical aspects
• Degree of protection: IP 41
• Weight: 130g
• Dimensions : 92x80x29 mm

• Airzone Aidoo Z-Wave transforme votre climatiseur en appareil Z-Wave