My account






New products

Viewed products

DANFOSS - Icon Master Controller with 10 outputs

088U1141

Danfoss

5702424048846

New product

Danfoss Icon™ is a modular heating system for individual room control. It can be configured as a wired or wireless system or as a combination, if required. Master controller with 10 outputs.

More details

More info

Danfoss Icon™ is a modular heating system for individual room control. It can be configured as a wired or wireless system or as a combination, if required.

The center of the system is the Danfoss Icon™ Master Controller 24V, which configures and ties the system together.

Installation and set-up of the Danfoss Icon™ Master Controller 24V is made easy by using the pre-defined application and intuitive touch user interface.

FEATURES :

  • Automatic balancing (PWM+), which ensure that the hydraulic balancing of the system is done by the master controller based on the actual room demand.
  • Requires no pre-setting on the manifold.
  • On/Off control possibility.
  • NC/NO actuator functionality.
  • Cooling change over (require an Expansion Module).
  • Supports 2, 3 or 4 pipe applications in various configurations (please see Expansion Module application guide for all configurations).
  • Supply temperature control (require an Expansion Module), can be set to either a fixed temperature or demand based supply temperature control.
  • 230V power output with protected earth for circulation pump.
  • 230V power output (for e.g. always on).
  • Heat demand signal output (for e.g. potential free relay).
  • Can be made wireless by adding a Radio Module (required for wireless installations).
  • Powerline communication (for 24V wired thermostats).
  • Possibility to combine wired and wireless thermostats in same installation.
  • APP functionality, for iOS and Android devices (require APP Module).
  • Software updatable through App or Zigbee module.
  • 3rd party integration with compatible Zigbee solutions through Icon™ Zigbee module.

TECHNICAL SPECIFICATIONS : 

  • Supply voltage: 220-240 VAC
  • Supply frequency: 50/60 Hz
  • Output voltage, actuators: 24 VDC
  • Max. power consumption per actuator output: 2 W
  • Number of actuator outputs (1 actuator per output terminal): 10
  • Output voltage, thermostats: 24 V DC
  • Stand-by consumption per thermostat: 0,2 W
  • Max. number of thermostats 10
  • Max. length of wire from master controller to a 24V thermostat (depends on cable type used):
    • If 2 × 2 × 0,6 mm2 STP/UTP: 100 m
    • If 2 × 0,5 mm2: 150 m
    • If > 2 × 0,75 mm2: 200 m
  • Stand-by consumption, Master Controller: < 2 W
  • Max. power consumption, excluding use of PWR 1 and PWR 2 outputs: < 50 W
  • Internal protection (fuse, non-replacable): 2,5 A
  • Output “Relay”: Potential free relay, Max. 2 A load
  • Actuator outputs, type: Type 1C (Micro interruption)
  • Output “PWR 1”, type and rated max. output: Type 1B (Micro disconnection)
  • Output “PWR 2”, type and rated max. output Type: Permanent output, 230 V, max. 50 W
  • Output “PWR 3” (optional, on Expansion Module - used for dew point sensor): 24 V DC, max. 1 W
  • Input “1” (optional, on Expansion Module - use varies acc. to application chosen): Ext. switch input (internal 24 V pull-up)
  • Input “2” (optional, on Expansion Module - use varies acc. to application chosen): Ext. switch input (internal 24 V pull-up)
  • Input “3”, sensor input (optional, on Expansion Module): External sensor, PT 1000 (Danfoss ESM 11)
  • Dimensions (W x H x D): 370 mm x 100 mm x 53 mm
  • Conformity declared acc. to following directives: LVD, EMC, RoHS and WEEE
  • Purpose of control: Individual electronic room temperature control
  • Method of providing earthing: Factory fitted power cord, incl. PE-conductor
  • Encapsulation (IP Class): IP 20
  • Protection class: Class II Construction with earthing terminal
  • Ambient temperature range, continuous use: 0 °C to 50 °C

Accessories