New products
-
MOES - Zigbee Tuya infrared human sensor
MOES ZSS-P01-PIR-A-MS is a passive infrared (PIR) motion detector based...
-
MOES - Zigbee light sensor ZSS-QY-LS-C-MS
Measure the brightness in an area of your home and create automatic...
-
SMLIGHT - 48v 24w POE injector for SMLIGHT dongle
Compact, practical POE midspan, ideal for powering your network...
Viewed products
-
EUTONOMY - Adapter DIN...
The euFIX R223NP Adapter is used to...
EUTONOMY - Adapter DIN for Fibaro Roller Shutter FGR-223 without buttons
EUT_R223NP
5906874103418
New product
The euFIX R223NP Adapter is used to install the Fibaro® Roller Shutter FGR-223 module on DIN TH35 type rail in the electrical switchboard.
More info
The euFIX R223NP Adapter is used to install the Fibaro® Roller Shutter FGR-223 module on DIN TH35 type rail in the electrical switchboard.
The euFIX R223NP Adapter consists of the case and the base board, where the FGR-223 module is mounted. The dimensions of the case are appropriate for a standard DIN TH35 type rail.
The base board contains a set of screw terminals, where all the wires (power supply, input and output signals, control push- buttons) can be safely connected.
FEATURES :
- DIN adapter for Fibaro Roller Shutter FGR-223 without push-buttons
- Used to install the Roller Shutter FGR-223 module on DIN TH35/TS35 type rail in the electrical switchboard
- Free location on the label to locate the controlled line
TECHNICAL SPECIFICATIONS :
- Supply voltage: 230 V AC +/-10%, 50–60Hz
- Load power: max 4,2A
- Dimensions: 34.8 x 87.3 x 64.7 mm
- Width in TE units: 2 TE modules
- Conductor wires cross section: max. 2.5 mm2
- Maximum length of wires connected to Sx, S1, S2 inputs: 10m
- Operating temperature: 0 °C to +50 °C
- Relative humidity: ≤90 %, no condensation
- Directives:
- LVD 2014/35/EC
- RoHS 2011/65/EU