Catalog
Control your connected lights easily with the Zigbee INNR smart remote...
The Zigbee Tuya Smart Life home automation box (Ethernet), the ideal...
Somfy Tahoma Switch, a home automation hub that centralizes and remotely...
SCHS520806
SCHNEIDER ELECTRIC - Triple finition plate Odace Touch (White)
MULTI-7-PORTS-USB
Enjoy a reliable home automation installation with different USB systems connected to the powered USB Hub.
CCTFR6200
SCHNEIDER ELECTRIC - 10-Pack Comap adapters for TRV
CCTFR6201
SCHNEIDER ELECTRIC - 10-Pack Giacomini adapters for TRV
DRB-2-2-00
The DIN Rail Box V2 allows installers and electricians to directly connect the relay switches to the electrical panel. Pack of 5 units.
EUT_S214
The euFIX S214 Adapter is used to install the Fibaro® Smart Module FGS-214 on DIN TH35 type rail in the electrical switchboard.
EUT_S214NP
The euFIX S214NP Adapter is used to install the Fibaro® Smart Module FGS-214 module on DIN TH35 type rail in the electrical switchboard.
X-010V
GCE ELECTRONICS - Extension X-010V for IPX800 V4
BLI685520
This double flush-mounting box will allow you to optimize the wiring and installation of your micromodules.
20209900
FRIENT water leak detector probe can detect flooding in a hard-to-reach area.
GC-POE48V/USB-DC
The PoE Splitter adapter can supply a home automation box such as Jeedom or eedomus with PoE.
EUT_S224
The euFIX S224 Adapter is used to install the Fibaro® Double Smart Module FGS-224 module on DIN TH35 type rail in the electrical switchboard.
USB-5V-2.5-0.8MM
Adapter cable that allows you to power a JEEDOM home automation box by adding an additional POE splitter adapter.
EUT_S224NP
The euFIX S224NP Adapter is used to install the Fibaro® Double Smart Module FGS-224 module on DIN TH35 type rail in the electrical switchboard.
9155061
Mount your 2N Access Unit reader on glass or uneven surfaces.
SCHS520702E
SCHNEIDER ELECTRIC Finition plate for ODACE wall switch (Alu)
SCHS540702
SCHNEIDER ELECTRIC Finition plate for ODACE wall switch (Anthracite)
OEC120
The additional 2m cable to extend the distance between the control box and the lamp(s).
OEC150
The additional 5m cable to extend the distance between the control box and the lamp(s).
ALMSWES
CARTELECTRONIC - WES 12VDC & 9VAC power supply
1WHUMTL
CARTELECTRONIC - Temperature, luminosity and humidity sensor
AEO_ZW189-EU
The Aeotec Range Extender 7 works seamlessly to amplify and repeat weak Z-Wave and Z-Wave Plus signals.
013G6583
DANFOSS - RA-IN15 radiator valves with integrated presetting
Z4-SCHLUESSEL
Disassemble and replace the batteries in your cylinder.
ANTENNA-EXT-868
Increase the communication range of your Simonsvoss system.