New products
-
MILESIGHT - Outdoor CO2 sensor IP65 - 4 in 1 LoRaWAN
The EM500-CO2 is designed to measure CO2 concentration, as well as...
-
MILESIGHT - IP65 pipe pressure sensor - LoRaWAN
The EM500 pressure sensor continuously monitors pipe pressure (liquids...
-
MILESIGHT - Soil moisture sensor IP65 - 3 in 1 - LoRaWAN
The EM500-SMTC accurately measures the ground and transmits data via...
Viewed products
-
QUBINO - Z-Wave+ Flush...
Smart Thermostat that measures power...
QUBINO - Z-Wave+ Flush On/Off thermostat 2 ZMNKID1
ZMNKID1
3830062071710
New product
Smart Thermostat that measures power consumption.
More info
The Qubino Flush On/Off Thermostat 2 is ideal for remotely controlling electric or water-based underfloor heating systems, electric water heaters, hot water pumps, electric radiators and similar. It is connected directly to either 240 V AC or 24 V DC, no batteries required.
Measure power consumption of your heating system
Smart Thermostat measures power consumption of the connected heating system - current consumption in W and cumulated consumption in kWh.
Measure and automatically regulate temperature
The Qubino smart thermostat comes with a digital temperature sensor. It allows you to measure and regulate room temperature by automatically switching on/off the heating device connected to it.
You can decide whether you want to display the temperature in °C or °F.
Flush On/Off Thermostat 2 can be used with all types of heating systems.
Flush On/Off Thermostat 2 works with water heater, heat pump, radiator, underfloor heating, IR panel, ...
Fast & Trouble-free set up with Z-Wave SmartStart
The setup of Smart Thermostat is user-friendly for everyone. Simply scan the QR code on the device, install it and provide with power. Your SmartStart gateway recognizes the device and the inclusion is done automatically.
Protect your smart home from cyber-attacks.
Qubino Flush On/Off Thermostat 2 is not only easy to setup but it’s virtually un-hackable, with the highest level of security for smart home devices on the market – Security 2.
FEATURES :
- Remote (via smartphone or PC) and local on/off control of valves for electric or water- based underfloor heating systems, electric water heaters, hot water pumps, electric radiators and similar
- Works with push-button (momentary switch) and toggle switch
- Capable of measuring the power consumption of the connected device in real time via smartphone
- Works on 110-240 VAC or 24-30 VDC
- Features one of the easiest and quickest installations of devices of this kind; fits in even the smallest flush mounting boxes
- Saves and restores the last status after a power failure
- Digital temperature sensor range is -25 ~ + 80°C (-13~176°F)
- Supports SmartStart inclusion for quick set up
- Automatically turn the device on/off based on Hysteresis.
- Automatically turn the device on if temperature is too low (antifreeze).
- Supports additional parameters for expert users, which allows for advanced configuration
- Acts as a signal repeater which improves the range and stability of your Z-Wave network
- Can be used to remotely control and trigger other devices in your Z-Wave network
TECHNICAL SPECIFICATIONS :
- Power supply : 110 - 240 VAC ±10% 50/60Hz, (24-30VDC)
- Rated load current of AC/DC output (resistive load) : 1 X 10A (230VAC) / 1 X 10A / 30VDC
- Output circuit power of AC/DC output (resistive load) : 2300W (230VAC) / 240W (24VDC)
- Power measurement accuracy : P=5-50W, +/-3W P>50W, +/-3%
- Operation temperature : -10 ~ +40°C
- Z-Wave operation range : up to 40 m indoors
- Dimensions (WxHxD) (package) : 41,8x36,8x16,9 mm (115x96x22 mm)
- Weight (with package) : 48 g (64 g)
- Electricity consumption : 0.4W
- For installation in boxes : Ø ≥ 60 mm or 2M
- Switching : Relay
- Digital temperature sensor cable length : 1000 mm
- Z-Wave Repeater : Yes