HEATIT CONTROLS - Z-Wave+ Rotary wall dimmer Z-DIM

Heatit Z-Dim is a Z-Wave rotary dimmer for many different types of light sources. The Heatit Z-Dim works on low loads without causing the lights to flicker. It dims LED-bulbs from 1-200VA, 230V halogen and incandescent bulbs, dimmable LED-drivers and electronic transformers. The dimmer is not affected by startup inrush currents. L+N leads must be connected.

The dimmer is equipped with a multiway switching option. This allows you to light and dim a light source from one dimmer, and later turn it off with another one. Very practical for stairwells, long hallways, etc.

The dimmer fits into standard standard Elko, Schneider Exxact and System 55 frame systems.

FEATURES :

• Z-Wave rotary dimmer
• Scene Controller
• Dims: LED, 230V halogen, Incandescent lightbulbs, Dimmable LED-drivers, Electronic transformers
• Starts at 1VA and dims up to 200VA LED
• Trailing edge
• Multiway switching option
• Electronic thermal cutoff with automatic reset
• Firmware updates (OTA)
• Power metering
• Supports encryption mode: S0, S2 Authenticated Class, S2 Unauthenticated Class

TECHNICAL SPECIFICATIONS :

• Protocol: Z-Wave Plus, 868,4MHz
• Chip: Z-Wave 500 chip
• Rated voltage: 230V 50/60Hz
• Power: 1VA - 200VA
• Input current: 0,9A
• Controls: Push and rotary dimmer
• Ambient temperature: 0°C to 40°C
• Range RF: Up to 40 meters (depending on surroundings)
• IP Class: IP20
• Flush mounting depth: 15mm
• Dimensions: 84 x 84 x 43mm
• Approvals: Z-Wave Plus, EN 50491-3: 2009, EN 60669-2: 2004, CE, EMC 2014/30/EU, RoHS 2011/65/EU, LVD 2014/35/EU